2019 Kuhns Mfg LLC 10 Bale Flat AF10 Accumulator

2019 Kuhns Mfg LLC 10 Bale Flat AF10 Accumulator

The innovative design of the accumulator allows it to be fully automatic without the use of hydraulics or electronics. Using excess energy from the baler plunger, the bales are pushed up and out the top of the front chute. There is no extra pressure applied to the plunger and the chute does not deform the bales. As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate. As the accumulator unloads itself, springs and counterweights automatically return all of the gates back to their starting position, ready for the next bale.

The 1036F has a spring loaded arm on each side of the accumulator to turn the first and and 6th bales sideways. As the bale approaches the bottom of the bed, it makes contact with the arm, turning it sideways

The Kuhns Hay Accumulator is built from the ground up as a durable machine. The concept has logged thousands of hours in many different areas, terrains, and types of hay with exceptional customer satisfaction.

Set up your baler in 4 easy steps: bolt on the bale chamber extension, adjust the hitch to the correct position, trim the guide belt to the proper length, and loosen the pressure in the bale chamber to compensate for the back pressure caused by pushing the bales up the chute.

• Our most popular accumulator

• The 10 bale accumulator is well suited for small farms.

• Handles bales from 32 to 38 long

• Bundle dimensions are 64 to 76 wide and 82 to 94 long

• The tie row allows for cross-stacking with the KN510F or 510F, making a more stable load on the wagon or truck.

• The 2 1/2 bale length fills a 7.5 ft wagon from one side to the other.

• Accepts 14x18 and 16x18 bales from 32" to 38" long at whatever density is needed, with no adjustments.